Xuzhou Bonovo Machinery & Equipment Co., Ltd

Зв'яжіться з нами!

Динаміка галузі

Динаміка галузі

Головна >  News >  Динаміка галузі

Кілька речей, які малий гусеничний навантажувач повинен робити взимку Україна

Січень 08, 2025

The following are just some common winter maintenance recommendations, and specific maintenance requirements may vary depending on the model and manufacturer. Therefore, it is recommended to refer to the owner's manual of the crawler loader you are using or consult a professional technician for specific maintenance recommendations for your machine.

It is very important to maintain crawler loader in winter to ensure its normal operation and extend its service life. Here are some key aspects of winter maintenance:

Warm storage: When the loader is not in use, store it in a dry, warm indoor place to avoid severe cold and moisture. If it is not possible to store it indoors, you can consider covering the machine with a protective cover or awning.

Antifreeze: Make sure the engine coolant has the appropriate antifreeze added. This will prevent the cooling system from freezing and being damaged in cold conditions.
Lubrication: Check the lubrication system to ensure that the lubricating oil and grease can still flow and lubricate properly at low temperatures. Use winter-appropriate lubricants in cold areas according to the manufacturer's recommendations.

Battery maintenance: Cold weather can have an adverse effect on battery performance, so the battery's electrolyte level and terminal cleanliness need to be checked regularly. Heaters or insulation pads can be used to keep the battery warm during downtime.

Tire maintenance: Check the air pressure of the tires and keep it within the manufacturer's recommended range. In winter, the air pressure of the tires may drop due to low temperatures. In addition, make sure the tires have adequate tread pattern to provide better traction and handling.

Cleaning: Clean the loader regularly, especially when used in an environment where corrosive substances such as snow, ice or salt are present. This will help prevent corrosion and damage and maintain the appearance of the machine.

Pre-start inspection: Perform a comprehensive machine inspection before each use, including fluid levels, lines, transmission system, hydraulic system, etc. Make sure all parts are working properly and repair any problems in time.

Antifreeze oil: For hydraulic oil and other fluids, use antifreeze suitable for winter conditions to prevent solidification or thickening at low temperatures.

ключові слова:багатофункціональний міні-навантажувач,Багатофункціональне навісне обладнання для міні-навантажувача,Навісне обладнання для міні-навантажувача

Обирай БОНОВО для високоякісних кущорізів для міні-навантажувачів із можливістю налаштування та швидкою доставкою. Зв’яжіться з нами сьогодні, щоб дізнатися, як наші найкращі продукти можуть покращити ваші завдання землеустрою!

44.png