First, the engine use precautions
1, after the new machine or overhaul, the diesel engine can not start at full load, high-speed work, must be low-speed light load running-in 50 hours before it can be transferred to normal operation.
2. Ensure the cleanliness of fuel. Filter through sediment or silk if necessary.
3, maintain normal water temperature (70 ~ 85℃), oil pressure (0.2 ~ 0.4MPa at medium speed).
4. During operation, if any abnormality is found, stop immediately for inspection.
5, it is not appropriate to use "hard water" as cooling water to prevent scaling and reduce the service life of the engine.
Second, daily maintenance
1. Check whether the oil level in the oil pan is between the two engraving lines of the oil scale and near the upper engraving line. The new machine or the diesel engine that has been out of use for a long time should be stopped after filling the top line with oil and running at low speed for 5-10 minutes, and then measure the oil level with the oil gauge again.
2, check the water tank.
3, check the oil level in the fuel injection pump, when insufficient, it should be added to the specified position.
4, eliminate three leakage (oil, water, gas) phenomenon.
5. Check the robustness of parts and accessories.
6, check the cleaning condition, oil removal, dust removal, pay special attention to the drying and cleaning of electrical equipment.
7, After 50 hours of light load operation of the new machine, the oil (including the oil in the injection pump) and the oil filter element should be replaced in time, and the oil pan and oil collector should be cleaned.
8. Timely protection of daily lubricating oil additives.
Choose BONOVO for high-quality, customizable brush cutters for skid steers with fast delivery. Contact us today to discover how our superior products can enhance your land management tasks!
2024-09-18
2024-09-18
2024-07-03
2024-03-08
2024-03-08
2024-03-08