Crawler excavator skip processing method

When the small crawler excavator has a jump gear, it should be stopped for inspection, find the cause, and solve the fault.

How to stop when driving on the flat road, it can be processed normally;

If there is a jump gear problem when going uphill, the gear can be adjusted to a low speed position, and the machine will stop when it reaches the top of the slope.

If you cannot reduce the gear normally, then you should stop according to the action essentials and requirements of the ramp stop, and then troubleshoot;

If there is a jump gear on the downhill slope, the gear should be placed in a high-speed position or take a gear grab (emergency gear reduction) measure according to the action of the gear, and then stop the machine after driving to the bottom of the slope to check and eliminate the fault;

If you block, grab the block; When the jump stop is unsuccessful or occurs again (at this time, it is neutral), and the machine is under the large slope (at this time, the machine will dive to the bottom of the slope at a very fast speed), it should be quickly stopped in accordance with the action rules and requirements of the downhill stop, and then the fault is deducted.

Choose BONOVO for high-quality, customizable brush cutters for skid steers with fast delivery. Contact us today to discover how our superior products can enhance your land management tasks!