ວິທີການຢ່າງວ່ອງໄວຈັດການກັບຄວາມລົ້ມເຫລວໃນລະຫວ່າງການກໍ່ສ້າງຂອງລໍ້ grabbers ໄມ້

ໃນເວລາທີ່ການນໍາໃຊ້ເປັນ wheeled wood grabber, regular maintenance should be performed to detect and eliminate faults in a timely manner. At the same time, improve the skills and safety awareness of operators to ensure the stable operation and production efficiency of the equipment. In case of complex faults, it is recommended to seek help from professional maintenance personnel to avoid greater losses.

As a flexible and flexible engineering machinery equipment, wheeled wood grabbers are widely used in wood processing, logistics handling and other fields. However, some faults are inevitable during use. This article will introduce several common wheeled wood grabber faults and their troubleshooting methods.

1. ເຄື່ອງຈັກບໍ່ສາມາດເລີ່ມຕົ້ນໄດ້

Fault cause: fuel system blockage, low battery, engine mechanical failure, etc.

ວິ​ທີ​ແກ້​ໄຂ​ບັນ​ຫາ​:

1. Check the fuel system, clean or replace the filter, and ensure that the fuel is unobstructed.

2. Check whether the battery connector is loose, charge or replace the battery.

3. Ask professional maintenance personnel to check the mechanical part of the engine and troubleshoot.

2. Insufficient pressure in the hydraulic system

Fault cause: hydraulic pump failure, hydraulic valve failure, hydraulic oil leakage, etc.

ວິ​ທີ​ແກ້​ໄຂ​ບັນ​ຫາ​:

1. Check the hydraulic pump. If there is a fault, replace or repair it.

2. Check the hydraulic valve to ensure that the valve core is not worn or stuck, and clean or replace it.

3. Check the hydraulic oil pipe and joints, tighten or replace the seals to prevent leakage.

3. Walking power is weak or the speed is too slow

Failure causes: insufficient tire pressure, drive motor failure, hydraulic system failure, etc.

ວິ​ທີ​ແກ້​ໄຂ​ບັນ​ຫາ​:

1. Check the tire pressure to ensure that it meets the requirements.

2. Check the drive motor. If there is a fault, repair or replace it.

3. Check the hydraulic system to ensure that there is no leakage and the pressure is normal.

4. Insufficient gripping force

Failure causes: wear of the gripper, hydraulic system failure, improper operation, etc.

ວິ​ທີ​ແກ້​ໄຂ​ບັນ​ຫາ​:

1. Check the gripper. If it is severely worn, replace the gripper.

2. Check the hydraulic system to ensure that there is no leakage and the pressure is normal.

3. Improve operating skills to ensure the correct and standardized use of the wood grabber.

5. Difficulty in steering

Causes of failure: steering pump failure, steering gear failure, hydraulic system failure, etc.

ວິ​ທີ​ແກ້​ໄຂ​ບັນ​ຫາ​:

1. Check the steering pump. If there is a failure, replace or repair it.

2. Check the steering gear to ensure that there is no wear or jamming, clean or replace it.

3. Check the hydraulic system to ensure that there is no leakage and the pressure is normal.

ຄໍາສໍາຄັນ:ເຄື່ອງບັນທຸກ skid multifunctional,ໄຟລ໌ແນບເຄື່ອງຕັກຕັກເຕືອນແບບເລື່ອນແບບ Multifunctional,ໄຟລ໌ແນບ Loader Skid Steer

ເລືອກ ໂບໂນໂວ ສໍາລັບເຄື່ອງຕັດແປງທີ່ມີຄຸນະພາບສູງ, ສາມາດປັບແຕ່ງໄດ້ສໍາລັບການຊີ້ນໍາ skid ດ້ວຍການຈັດສົ່ງໄວ. ຕິດຕໍ່ພວກເຮົາໃນມື້ນີ້ເພື່ອຄົ້ນພົບວ່າຜະລິດຕະພັນຊັ້ນສູງຂອງພວກເຮົາສາມາດປັບປຸງວຽກງານການຄຸ້ມຄອງທີ່ດິນຂອງເຈົ້າໄດ້ແນວໃດ!