EN
This article will introduce in detail the core contents such as "daily maintenance of skid loader mixing bucket", "maintenance of mixing bucket hydraulic system", and "cleaning method of mixing bucket at construction site" to help operators and managers improve the level of equipment management.
DAILY INSPECTION AND MAINTENANCE
Before and after daily operation, the "daily maintenance of skid loader mixing bucket" project must be fully inspected, including but not limited to the following points:
Check the wear of the mixing blade: The mixing blade is the "core working component of the mixing bucket" and needs to be checked regularly for breakage or severe wear, and replaced in time if necessary.
Lubricate the movable joints: All movable joints should be filled with grease as required to prevent jamming and abnormal noise.
Hydraulic hose inspection: Check whether the hydraulic hose is broken or leaking oil to avoid "skid loader mixing bucket hydraulic system leakage".
MAINTENANCE OF THE HYDRAULIC SYSTEM
The hydraulic system is the key to "maintenance of the hydraulic system of the skid loader mixing bucket". Check the hydraulic oil level and cleanliness at least once a month, and replace the hydraulic oil and filter element if necessary. Special attention should be paid to:
Use the hydraulic oil of the model recommended by the manufacturer;
Keep the hydraulic oil tank sealed to prevent dust or water from mixing;
Clean the oil pipe joints regularly to avoid "contamination of the mixing bucket hydraulic system".
CLEANING AND RUST PREVENTION MEASURES
After completing daily construction, the "construction site mixing bucket cleaning method" operation should be carried out immediately. It is recommended to use a high-pressure water gun to rinse the interior and the outer shell, focusing on removing residual concrete and aggregates. During winter construction, it is necessary to drain the internal moisture to prevent ice expansion from damaging the blades or barrel.
In addition, after cleaning, rust inhibitors can be applied to the exposed metal surface to effectively prevent rust caused by long-term outdoor storage.
COMMON FAULTS AND PREVENTION
Mastering the "common fault maintenance skills of mixing buckets" is crucial to improving work efficiency. Common problems include uneven mixing, hydraulic motor weakness, abnormal bearing noise, etc. These problems should be promptly checked when they occur:
Uneven mixing: Check whether the blade installation angle is correct;
Motor weakness: mostly due to insufficient oil pressure in the hydraulic system or motor wear;
Abnormal noise problem: Most of them are related to lack of oil or aging of the bearing, which should be lubricated or replaced in time.
OPERATOR TRAINING AND SPECIFICATIONS
In addition to the maintenance of the equipment itself, operators should regularly receive "skid loader mixing bucket operation training" to master standard operating procedures and safety specifications. Qualified operators can not only improve efficiency, but also effectively reduce equipment loss and failure rate.
Choose BONOVO for high-quality, customizable brush cutters for skid steers with fast delivery. Contact us today to discover how our superior products can enhance your land management tasks!
